|Display Mode:||Counter 5+1/6+1||Color:||White|
|Material:||Glass Case||Bottom Bearing:||Double Gem Bearing|
YEM316AH Precision 2.0 Single Phase Energy Meter Direct Mode With Front Board Installation
AC voltage 4kv for 1 minute,1.2/50us
wavefrom impulse voltage 6kv
|Reference Voltage(V)||Current Specification(A)||
|127 V ,230 V||5(30)A ,10(50)A, 20(100)A||0.02A,0.04A,0.08A||Counter 5+1/6+1||PC|
Model YEM316AH single phase electronic front board installed active energy meter is a kind of new style
single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale
integrate circuit , use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in internati onal standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it is use for setting indoor or out door, and it can display total energy consumption by step motor type impulse register. It has following featu res: good reliability, small volume,light weight, specious nice appearance, convenient installation, etc.The meter can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net,It has following features :good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.
Company Profile :
Transport and storage:
Transport and storage of the meter must not be shaken and must accord with ZBY002-81.
The meter must be stored in the original packing box and the environmental temperature is in -20℃～＋55℃ .Relative humidity shall not exceed 95%. And there isn’t any corrosive gas. The environmental temperature shall not vary violently.
The meters should be in the original packing box and the boxes should be piled up no more than five on the rack . The separate meter is not suitable for storage.
تماس با شخص: Iris